Leviathan Marine - Marine Engineering Services and Sales
 
// Home // Engineering // Exhaust Systems and Modifications // S/Y Jupiter

Contract to replace the old dry exhaust system with a custom manufactured fibreglass lift silencer/separator system.

Beaulieu Shipyard, France.
Engine and dry exhaust
Installed in the boat

S/Y Jupiter - Beaulieu Shipyard, France.
Click to enlarge photo

Our contract was to remove the main engine from the vessel and rebuild it, reinstall and fit a custom manufactured exhaust system for both the main engine and generators incorporating a lift silencer/ separator system.

 

Engine and dry exhaust
Click to enlarge photo

V10 Mercedes rebuilt by Leviathan Marine shown with manufactured dry exhaust two into one and then into the custom manufactured lift silencer.

 

Installed in the boat
Click to enlarge photo

Front angle of main engine showing water injection lines and dry section.

The results speak for themselves. The vessel, after a refit of this size, left France and sailed to New Zealand without fault.
Custom lift silencer
Main engine and generator
Port Generator

Custom lift silencer
Click to enlarge photo

Shown here is a custom manufactured lift silencer withangle on the base to suit hull shape.

 

Main engine and generator
Click to enlarge photo

Shown here are the main engine and starboard generator separators mounted in the starboard side cupboards in the saloon area.

 

Port Generator
Click to enlarge photo

Port side generator separator with main engine anti-siphon system.

Leviathan Marine will come to you, anywhere in the world, to install the right system with the highest possible standard of service and customer satisfaction. Contact us today for further information >>>

 

 

Some examples of our work from past contracts:


OPAL-C Generator Exhaust

Opal C - Click to see photo's and details of project

Rebuild, reinstall and fit a custom manufactured exhaust system.

Photo's and details of project >>>

S/Y Jupiter

S/Y Jupiter - Click to see photo's and details of project

Contract to replace the old dry exhaust system with a custom manufactured fibreglass lift silencer/separator system.

Photo's and details of project >>>

 

M/Y Octopussy

S/Y Jupiter - Click to see photo's and details of project

Leviathan Marine was contracted to to supply and install new exhaust cooling spray rings for the main engines. On completion of the project, sea trial results proved that the cooling efficiency had been increased and the engines exhaust back pressures were decreased by an average of 200mm of water.

Photo's and details of project >>>

Leviathan Marine will come to you, anywhere in the world, to install the right system with the highest possible standard of service and customer satisfaction. Contact us today for further information >>>